Thursday, December 1, 2011
Saab R4 Navigation System manual Appendix
Saab R4 Navigation System Manual, Appendix. This guide is a supplement to R4 Navigation System operators manual (7000 109-143 Rev. F2). Describes the new features introduced in version R4 navigation Display 5.0.96. Display navigation R4, sw version 5.0.94, may be used to calculate tide forecasts based on user input data from the tables published by the Hydrographic Office Admiralty Tide Uk, you are required to enter data for a specific port and select the point in time, for which you want to calculate estimates. Features predicting tides to display navigation R4 is centered around the three views of a list of ports plot Tide and Tide table views available in the mode of travel planning. It should be noted that the effects of weather (e.g. wind and atmospheric pressure), as well as other factors not accounted for in a generalized models of tides can cause considerable variance between actual and predicted tide. Tidal predictions are calculated by the so-called simplified harmonic method. Harmonic constants and other parameters required are included in the publications below. Affiliate sales. It should be noted that the algorithms used are specially adapted to these data. Tidal parameters derived from other sources, does not apply when calculating tidal R4 navigation display. Predictions calculated by this method will not be completely compatible with tabular high/low and hourly predictions from Admiralty tide tables. This is due to the fact that the tabular values are based on more complete data set, compared to the limited number of parameters used by the simplified harmonic method in the source data is split between volumes with different geographical coverage in the following way: the UTC time zone offset (UTC time to local time) in hours and minutes from ATT part III. Direct access trading. This information is important, because the ATT refers to local time at the port of this offset from UTC. Enter the data specified in the ATT, regardless of the settings for the other offset time (e.g. time). See further comments on the treatment of offsets in the following sections. Set the latitude and longitude of the port. This Information is optional, it is not required to calculate tide. If implemented, the current distance to the actual port appear in the list of stations tidal. The position is not listed under ATT III. ML (Z0) is the mean level in meters with ATT part III. Most of the station is a constant. Tables, adjustment of seasonal and every two weeks the variety required in certain posts may be entered as described below.Download: Saab R4 Navigation System Manual Supplement
