Thursday, December 1, 2011
Racing Setup Guide-Redpoint closes a repositioning of the Ducati Monster
The bracket is designed to match each relocation Ducati monsters within the ranges of 2000-2004. He may fit other years as well, but can't guarantee an exact match as minor changes were made over the years. The bracket is designed to replace the signal light, turn tail, rearmost part of the picture frame in which the Assembly license plate Assembly and load stock. It is assumed that the frame changes have already been removed.
Warning: cropping or changing the frame in any way may damage the motorcycle, impact performance and/or safety. I don't condone or endorse cut frame or the stock components on the motorcycle which may be a violation of local laws or the State. Please contact the local authorities on the legality of installing these components before continuing.
Parts
Bracket of relocation comes with three sections that should be assembled to the name you want before you install on your bike. Closing bracket signal operating light ' tail they separate to allow the maximum amount of flexibility for setting. If you have integrated turn signals or tail lights, you can leave off the parts aren't needed to clean up the look of the bike after installation.
Assembly
Assemble the parts as shown here-with primary closing down, and then close a run, and then the light bracket ' tail. Screw them together with the supplied button head Allen bolts, nylon insert lock nuts. Insert the screws through the bottom and attach at the top of the nuts are close to maintain a clean appearance from the bottom of the bracket.
