Thursday, December 1, 2011
Renault Mascot W21-760-3125 INSTALLATION INSTRUCTIONS
Special Instructions for Air Connections
1. To cut the tubing correctly an appropriate cutter must be used (not a scissors)
2. When inserting the tubing into the connection it must be pushed in approximately 14mm until a click is heard.
3. To remove the tube, push the flange on the connection and at the same time pull the tube. (No tool is necessary.)
4. ATTENTION, when a tube is removed it is important to trim 14mm from the end before reconnection.
5. IT is advisable that LOCKTITE be used on the threaded fittings.
Important
• The Installation manual should be read entirely before beginning assembly.
• This kit does not increase the G.V.W. (gross vehicle weight) of your vehicle, for your safety and to avoid any damage to your vehicle do not exceed the maximum loading recommended by the manufacturer.
• Do not inflate air bags before assembly.
• Once the kit is installed, do not exceed the max and min pressure limits, incorrect use or over inflation can cause deterioration of your suspension.
