Thursday, September 15, 2011
2008-11 Cadillac CTS EGX Sport Mesh Grille Installation Manual
2008-11 Cadillac CTS EGX Sport Mesh Grille Installation Manual. Open the hood and remove the radiator support cover and attached weatherstripping (save for reinstallation). E&G recommends either lifting the vehicle with a lift or raising the vehicle with a jack and installing jack stands before proceding. Remove the two (2) push pins located in the front wheel well openings (each side). Push back the front portion of the front fender liner to expose the bumper cover to front fender attaching bolts. Use a 10mm socket to remove the attaching bolts (one per side). With the help of an assistant, carefully pull the front bumper cover forward until you can access the two lower push pins that attach the air flow directors to the sides of the lower grille opening, then place the bumper cover onto a clean work area for factory grille Use a body putty spreader or other non-metallic tool to remove the wreath and crest from the factory grille. Do not try and use a screwdriver as you will damage the chrome on the emblems.removal. Grind flush the alignment pins from the back of the emblems and install the supplied double faced tape to the back of the wreath and crest emblems once the original double faced tape has been removed.
